CNC water jet glass cutting machine

CNC glass water jet cutting machine cutting table: bridge and cantilever 2000*1000mm, 2000*3000mm, 1500*2500mm etc.

What is Waterjet?

The technologies use the principle of pressurizing water to extremely high pressures, and allowing the water to escape through a very small opening (typically called the "orifice" or "jewel"). Water jets use the beam of water exiting the orifice (or jewel) to cut the material.

Abrasive jets use that same beam of water to accelerate abrasive particles to speeds fast enough to cut through much harder materials

 

Application of waterjet

HP waterjet cutting is realized by waterjet with great kinetic energy and high speed. It belongs to high energy beam category as well as laser, ionic beam, electron beam. Among them HP waterjet cutting is the only processing technology which is made in cold state. As a high and new technology, to some extent, it is a revolution in cutting field.

Currently HP waterjet cutting is mainly applied in below areas.

Ø        Application in metallic material cutting

1) To cut the metallic materials used for architectural decoration, such as stainless steel.

2) To make and cut the crust of machine equipments

3) To cut all kinds of metallic spare parts

Ø        Application in glass cutting

1)     To cut the glass of household electrical appliances

2)     To cut glass used in shower room

3)     To cut glass for architectural decoration, craftwork and auto.

Ø        Application in processing tiles, stones and other building materials.

Water cutter is applied in this field much earlier. Currently, the overwhelming majority in this area use it. They focus on artistic matching. At present, tile matching and stone matching have expanded all over the world.  

Ø        Application in composites, bulletproof material, soft material and others

1) With robot arm to cut automotive interior components

2) To cut foam, sponge, paper, rubber, etc.

3) To cut nylon, carpet, etc.

Table model	1520BA	1525BA	1530BA	2040BA	2515BA	3040BA
Cutting area	1.5m×2m	1.5m×2.5m	1.5m×3.0m	2.0m×4.0m	2.5m×1.5m	3.0m×4.0m
Max moving speed	6000mm/min	6000mm/min	6000mm/min	6000mm/min	6000mm/min	6000mm/min
Way of drive	AC servo	AC servo	AC servo	AC servo	AC servo	AC servo
Control accuracy	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01
Cutting accuracy	±0.1~±0.2	±0.1~±0.2	±0.1~±0.2	±0.1~±0.2	±0.1~±0.2	±0.1~±0.2
Pump model	APW38037Z	APW38037Z	APW38037Z	APW38037Z	APW38037Z	APW38037Z
Max working pressure	380Mpa	380Mpa	380Mpa	380Mpa	380Mpa	380Mpa
Continuous operating pressure	330MPa	330MPa	330MPa	330MPa	330MPa	330MPa
Power requirement	37KW 380V/50HZ	37KW 380V/50HZ	37KW 380V/50HZ	37KW 380V/50HZ	37KW 380V/50HZ	37KW 380V/50HZ
Max. oil discharge	90 L/min	90 L/min	90 L/min	90 L/min	90 L/min	90 L/min
Max. water discharge	3.7L/min	3.7L/min	3.7L/min	3.7L/min	3.7L/min	3.7L/min
Max. diameter of orifice	0.3mm	0.3mm	0.3mm

CNC water jet glass cutting machine